SLATTED DOOR FOR PAX
Description
- Our doors for Pax are lengthened so that they cover most of the toe-kick area of the IKEA frame, leaving just under 1 inch clearance for a rug.
- Our Slatted doors feature crisp, continuous vertical slats that create a sleek, modern look. The Slatted surface applies to both the front and back surfaces of the door. It’s relevant to mention that the slender design of small slats (protrusions on the door surface) are considered delicate and should be handled with utmost care. Hard knocks to the surface of the slats may result in cracks.
- The doors have an MDF core and are sprayed several times for a smooth finish using a German quality paint.
- Please use the drop-down menu to indicate your door opening preference (to the left or right) for each door.
- Available in the full Fronteriors colour palette.
- Your Fronteriors order does not include the IKEA frames and hinges. These must be purchased from IKEA directly. We recommend adding handles to personalize your doors, but if you prefer a handle free solution, we suggest using IKEA‚ push-open mechanisms.
- Important: When planning the placement of your internal shelves and drawers, please refer to our PAX Planning/Assembly Guide for guidance on the location of hinges. Similarly, when using IKEA’s online Pax Planner, please add doors to the frames before planning the internal configuration as this will also reveal hinge locations and guide you on where drawers/shelves can be located.
- Samples boxes can be ordered here.
Planning & Assembly Guides
Find our planning & assembly guides here
Production, Shipping & Returns
PRODUCTION LEAD TIMES
Orders are manufactured and shipped from the US in 20-25 working days. Note that working days do not include weekends and public holidays.
SHIPPING
Please note the delivery time is calculated as production lead time + transit time. Transit times will vary depending on your location and the shipping option selected. Once your order is ready for delivery you will receive an email notification. If you are based outside of USA you will be asked to pay custom duties/tax on delivery of your order, in accordance with your country's tariffs.
Extreme length surcharges
Shipments containing one or more components exceeding a length of 233cm / 92 inches may be subject to an Extreme Length surcharge of USD 265 which is imposed by the shipping carrier.
Please view the full shipping policy page here. Any questions? reach out to us.
RETURNS POLICY
Your order is considered final once placed. Because our products are made to order, we do not accept returns. On receipt of delivery, please ensure that you examine the packaging/products for any damages and report any issues at the time of delivery.
Product Disclaimers
MDF & WOOD VENEER
Please note that much like solid wood, MDF can exhibit dimensional changes as a result of changes in environment. As such, If wood veneer and MDF isn't acclimated to the ambient relative humidity and temperature, it may expand or contract. It is important therefore to store products on site for a minimum of 24 hours or longer in the environment in which they will be installed. To prevent the wood from undergoing natural shrinkage phenomenon, it is important to moderate the use of air conditioning or heating. If the air is too dry, the wood and painted MDF products may respond with micro-cracks on the surface. On the contrary, if the air is too saturated with humidity, they may expand.
CANE WEAVES
As cane is a natural, organic material imperfections in colour and consistency of the weave do occur and are considered normal. These are not faults.
Product Care
A damp cloth and lukewarm water is the best way to clean your Fronteriors components. To remove oily marks and fingerprints, use a mild detergent, a solution of water and vinegar, or a mild dishwashing liquid, and then wipe the surface with a dry cloth to make sure there are no smudges.
Harsh soaps, strong detergents, hard sponges, and vigorous scrubbing can damage the surfaces.